A common concern for people that have a new water softener in Arizona is
that their water is too soft. If you have felt this concern, understanding
the science behind your water softener in Arizona may help to clear up
any concerns you may have.
When sodium is mixed with calcium and magnesium, the most common minerals
in hard water, it changes the water. If you started with water that had
a hardness of 10 grains per gallon (GPG), sodium introduced to the water
would reduce the hardness to 0 GPG.
It is impossible to have negative water hardness with a water softener
in Arizona. It is like taking a sponge and filling it with water. The
sponge can only saturate to a certain point. After that, it is not like
you can push more water into the sponge if it is at its capacity. The
same kind of principle works with your water softener in Arizona. The
sodium will only adhere to the minerals in the water. Your water softener
isn’t able to adhere to minerals that aren’t there.
The real problem is not with your water softener in Arizona. To trouble
shoot this kind of problem it may be that you need to reduce the amount
of soaps and detergents that you use. If you use too much shampoo, for
example, it lathers up much, much more than it would with hard water.
In fact, most people can cut down their soap usage in half.
If you feel like your water softener isn’t functioning correctly
after you decrease the amount of soap in your home, you can always call
your dealer. They can come and check out your water softener in Arizona
and can test the water to make sure everything is functioning correctly.