Every place you live has different challenges when it comes to water. Some
places have water that has a rotten egg smell from excessive hydrogen
sulfide. Other water carries dangerous pesticides because of local industry.
For Phoenix residents, hard water is a huge problem. It causes lime scale
build up in bathrooms,
plumbing, and appliances. The fix is usually as easy as installing a water softener
in Phoenix, but if you still aren’t convinced, here are the reasons
Phoenix water is considered hard.
You probably already know that there are two kinds of water: hard and
soft. Both hard and soft water are measured by checking how many minerals
are absorbed through the water. The hardness of water is measured in grains
per gallon (GPG). A grain is considered 64.8 milligrams of calcium carbonate.
The measurement simply measures how many minerals are absorbed in water
so that you can get the right water softener in Phoenix that will fit
If your water falls less than 1 GPG then your water is considered soft.
Water between 1-3.5 GPG means that your water falls in to a gray zone
where a water softener in Phoenix may used if you notice calcium build
up. Anything over 3.5 is considered hard water. Water above 10.5 GPG is
thought to be very hard water. Does that make you wonder where the water
in Phoenix fits in? Most water test indicate that water in Phoenix runs
almost 20 GPG which is almost double the industry standard.
It may see strange that these little pills of salt can make such a difference
to your plumbing, but the excessively hard water makes a water softener
in Phoenix a must. Without it, it will only take about 20 years for the
pipes in your home to be so full of calcium build up that they seal shut.
A water softener in Phoenix is a sound investment in your home.