The person that installs your water softener in Arizona will help to make
sure that all the equipment is working properly, and a water softener
in Arizona is relatively maintenance free. All you really have to do is
make sure you add salt to the system whenever it is low-for the most part.
While there isn’t a lot of maintenance with a water softener in
Arizona, you should understand the basics of what is actually inside of
your water softener so that you can trouble shoot any problems that may arise.
Inside of your water softener you will find three distinct layers that
each contain an important element to your water softener in Arizona. The
first layer contains resin beads. These are the beads that actually soften
your water. As the water moves through your system, these beads add the
correct amount of sodium to your water. The problem is that over time
these beads will need regeneration, and that is what salt is for. The
resin beads soak in a brine solution inside of the tank of your water
softener in Arizona, making it possible for them to continue to soften
The second layer of your water softener is called brine, or sodium-saturated
water. The water comes in contact with the resin beads so that they will
continue to do their job. The brine in your water softener in Arizona
is drained and re-filled at intervals defined by a timer, water usage,
or resin bead depletion.
Finally, salt is the final layer of your water softener in Arizona. You
always want to make sure that the salt is filled to the level recommended
by your manufacturer.
To make sure your water softener in Arizona is functioning correctly check
every time you add salt to be sure that all of these layers are coming
in contact with one another. It will ensure that your water softener will
run in peak condition.